# Copyright 1999-2024 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 EAPI=8 PYTHON_COMPAT=( python3_{10..12} ) inherit check-reqs cmake optfeature python-single-r1 qmake-utils xdg DESCRIPTION="QT based Computer Aided Design application" HOMEPAGE="https://www.freecad.org/ https://github.com/FreeCAD/FreeCAD" MY_PN=FreeCAD if [[ ${PV} = *9999 ]]; then inherit git-r3 EGIT_REPO_URI="https://github.com/${MY_PN}/${MY_PN}.git" S="${WORKDIR}/freecad-${PV}" else SRC_URI="https://github.com/${MY_PN}/${MY_PN}/archive/refs/tags/${PV}.tar.gz -> ${P}.tar.gz" KEYWORDS="~amd64" S="${WORKDIR}/FreeCAD-${PV}" fi # code is licensed LGPL-2 # examples are licensed CC-BY-SA (without note of specific version) LICENSE="LGPL-2 CC-BY-SA-4.0" SLOT="0" IUSE="debug designer +gui qt6 test" FREECAD_EXPERIMENTAL_MODULES="cloud netgen pcl" FREECAD_STABLE_MODULES="addonmgr fem idf image inspection material openscad part-design path points raytracing robot show surface techdraw tux" for module in ${FREECAD_STABLE_MODULES}; do IUSE="${IUSE} +${module}" done for module in ${FREECAD_EXPERIMENTAL_MODULES}; do IUSE="${IUSE} ${module}" done unset module RESTRICT="!test? ( test )" RDEPEND=" ${PYTHON_DEPS} dev-libs/OpenNI2[opengl(+)] dev-libs/boost:= dev-libs/libfmt:= dev-libs/libspnav[X] dev-libs/xerces-c[icu] !qt6? ( dev-qt/qtconcurrent:5 dev-qt/qtcore:5 dev-qt/qtnetwork:5 dev-qt/qtxml:5 dev-qt/qtxmlpatterns:5 ) qt6? ( dev-qt/qtbase:6[concurrent,network,xml] dev-qt/qt5compat:6 ) media-libs/freetype media-libs/qhull:= sci-libs/hdf5:=[fortran,zlib] >=sci-libs/med-4.0.0-r1 sci-libs/opencascade:=[json,vtk] sci-libs/orocos_kdl:= sys-libs/zlib virtual/libusb:1 cloud? ( dev-libs/openssl:= net-misc/curl ) fem? ( !qt6? ( sci-libs/vtk:=[qt5,rendering] ) qt6? ( sci-libs/vtk:=[-qt5,qt6,rendering] ) ) gui? ( >=media-libs/coin-4.0.0 virtual/glu virtual/opengl !qt6? ( dev-qt/designer:5 dev-qt/qtgui:5 dev-qt/qtopengl:5 dev-qt/qtprintsupport:5 dev-qt/qtsvg:5 dev-qt/qtwebengine:5[widgets] dev-qt/qtwidgets:5 dev-qt/qtx11extras:5 pcl? ( sci-libs/pcl[qt5] ) $(python_gen_cond_dep ' dev-python/matplotlib[${PYTHON_USEDEP}] >=dev-python/pivy-0.6.5[${PYTHON_USEDEP}] dev-python/pyside2[gui,svg,webchannel,webengine,${PYTHON_USEDEP}] dev-python/shiboken2[${PYTHON_USEDEP}] ' python3_{10..11} ) ) qt6? ( designer? ( dev-qt/qttools:6[designer] ) dev-qt/qttools:6[widgets] dev-qt/qtbase:6[gui,opengl,widgets] dev-qt/qtsvg:6 dev-qt/qtwebengine:6[widgets] pcl? ( sci-libs/pcl[-qt5,qt6(-)] ) $(python_gen_cond_dep ' dev-python/matplotlib[${PYTHON_USEDEP}] >=dev-python/pivy-0.6.5[${PYTHON_USEDEP}] dev-python/pyside6[gui,svg,webchannel,webengine,${PYTHON_USEDEP}] dev-python/shiboken6[${PYTHON_USEDEP}] ' ) ) ) netgen? ( media-gfx/netgen[opencascade] ) openscad? ( media-gfx/openscad ) pcl? ( sci-libs/pcl:=[opengl,openni2,vtk] ) $(python_gen_cond_dep ' dev-python/numpy[${PYTHON_USEDEP}] dev-python/pybind11[${PYTHON_USEDEP}] addonmgr? ( dev-python/GitPython[${PYTHON_USEDEP}] ) fem? ( dev-python/ply[${PYTHON_USEDEP}] ) ') " DEPEND=" ${RDEPEND} >=dev-cpp/eigen-3.3.1:3 test? ( $(python_gen_cond_dep 'dev-python/pyyaml[${PYTHON_USEDEP}]') !qt6? ( dev-qt/qttest:5 ) ) " BDEPEND=" app-text/dos2unix dev-lang/swig test? ( $(python_gen_cond_dep 'dev-python/pyyaml[${PYTHON_USEDEP}]') !qt6? ( dev-qt/qttest:5 ) ) " # To get required dependencies: # 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake' # We set the following requirements by default: # arch, draft, drawing, import, mesh, part, qt5, sketcher, spreadsheet, start, web. # # Additionally, we auto-enable mesh_part, flat_mesh and smesh # Fem actually needs smesh, but as long as we don't have a smesh package, we enable # smesh through the mesh USE flag. Note however, the fem<-smesh dependency isn't # reflected by the REQUIRES_MODS macro, but at # cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake:187. # # The increase in auto-enabled workbenches is due to their need in parts of the # test suite when compiled with a minimal set of USE flags. REQUIRED_USE=" ${PYTHON_REQUIRED_USE} designer? ( gui ) inspection? ( points ) path? ( robot ) python_single_target_python3_12? ( gui? ( qt6 ) ) " # There is no py3.12 support planned for pyside2 PATCHES=( "${FILESDIR}"/${PN}-0.21.0-0001-Gentoo-specific-disable-ccache-usage.patch "${FILESDIR}"/${PN}-0.21.1-Gentoo-specific-don-t-check-vcs.patch ) DOCS=( CODE_OF_CONDUCT.md README.md ) CHECKREQS_DISK_BUILD="2G" pkg_setup() { check-reqs_pkg_setup python-single-r1_pkg_setup [[ -z ${CASROOT} ]] && die "\${CASROOT} not set, please run eselect opencascade" } src_prepare() { # Fix desktop file sed -e 's/Exec=FreeCAD/Exec=freecad/' -i src/XDGData/org.freecadweb.FreeCAD.desktop || die find "${S}" -type f -exec dos2unix -q {} \; || die "failed to convert to unix line endings" cmake_src_prepare } src_configure() { local mycmakeargs=( -DBUILD_ADDONMGR=$(usex addonmgr) -DBUILD_ARCH=ON -DBUILD_ASSEMBLY=OFF # deprecated -DBUILD_CLOUD=$(usex cloud) -DBUILD_COMPLETE=OFF # deprecated -DBUILD_DRAFT=ON -DBUILD_DESIGNER_PLUGIN=$(usex designer) -DBUILD_DRAWING=ON -DBUILD_ENABLE_CXX_STD:STRING="C++17" # needed for >=boost-1.77.0 -DBUILD_FEM=$(usex fem) -DBUILD_FEM_NETGEN=$(usex netgen) -DBUILD_FLAT_MESH=ON -DBUILD_FORCE_DIRECTORY=ON # force building in a dedicated directory -DBUILD_FREETYPE=ON # automagic dep -DBUILD_GUI=$(usex gui) -DBUILD_IDF=$(usex idf) -DBUILD_IMAGE=$(usex image) -DBUILD_IMPORT=ON # import module for various file formats -DBUILD_INSPECTION=$(usex inspection) -DBUILD_JTREADER=OFF # code has been removed upstream, but option is still there -DBUILD_MATERIAL=$(usex material) -DBUILD_MESH=ON -DBUILD_MESH_PART=ON -DBUILD_OPENSCAD=$(usex openscad) -DBUILD_PART=ON -DBUILD_PART_DESIGN=$(usex part-design) -DBUILD_PATH=$(usex path) -DBUILD_POINTS=$(usex points) -DBUILD_RAYTRACING=$(usex raytracing) -DBUILD_REVERSEENGINEERING=OFF # currently only an empty sandbox -DBUILD_ROBOT=$(usex robot) -DBUILD_SHOW=$(usex show) -DBUILD_SKETCHER=ON # needed by draft workspace -DBUILD_SMESH=ON -DBUILD_SPREADSHEET=ON -DBUILD_START=ON -DBUILD_SURFACE=$(usex surface) -DBUILD_TECHDRAW=$(usex techdraw) -DBUILD_TEST=ON # always build test workbench for run-time testing -DBUILD_TUX=$(usex tux) -DBUILD_VR=OFF -DBUILD_WEB=ON # needed by start workspace -DBUILD_WITH_CONDA=OFF -DCMAKE_INSTALL_DATADIR=/usr/share/${PN}/data -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/${PF} -DCMAKE_INSTALL_INCLUDEDIR=/usr/include/${PN} -DCMAKE_INSTALL_PREFIX=/usr/$(get_libdir)/${PN} -DFREECAD_BUILD_DEBIAN=OFF -DFREECAD_USE_EXTERNAL_KDL=ON -DFREECAD_USE_EXTERNAL_SMESH=OFF # no package in Gentoo -DFREECAD_USE_EXTERNAL_ZIPIOS=OFF # doesn't work yet, also no package in Gentoo tree -DFREECAD_USE_FREETYPE=ON -DFREECAD_USE_OCC_VARIANT:STRING="Official Version" -DFREECAD_USE_PCL=$(usex pcl) -DFREECAD_USE_PYBIND11=ON -DFREECAD_USE_QT_FILEDIALOG=ON -DFREECAD_USE_QTWEBMODULE:STRING="Qt WebEngine" # install python modules to site-packages' dir. True only for the main package, # sub-packages will still be installed inside /usr/lib64/freecad -DINSTALL_TO_SITEPACKAGES=ON # Use the version of shiboken2 that matches the selected python version -DPYTHON_CONFIG_SUFFIX="-${EPYTHON}" -DPython3_EXECUTABLE=${PYTHON} ) if use debug; then # BUILD_SANDBOX currently broken, see # https://forum.freecadweb.org/viewtopic.php?f=4&t=36071&start=30#p504595 mycmakeargs+=( -DBUILD_SANDBOX=OFF -DBUILD_TEMPLATE=ON ) else mycmakeargs+=( -DBUILD_SANDBOX=OFF -DBUILD_TEMPLATE=OFF ) fi if use qt6; then mycmakeargs+=( -DFREECAD_QT_MAJOR_VERSION=6 -DFREECAD_QT_VERSION=6 -DQT_DEFAULT_MAJOR_VERSION=6 -DQt6Core_MOC_EXECUTABLE="$(qt6_get_bindir)/moc" -DQt6Core_RCC_EXECUTABLE="$(qt6_get_bindir)/rcc" -DBUILD_QT5=OFF ) else mycmakeargs+=( -DFREECAD_QT_MAJOR_VERSION=5 -DFREECAD_QT_VERSION=5 -DQT_DEFAULT_MAJOR_VERSION=5 -DQt5Core_MOC_EXECUTABLE="$(qt5_get_bindir)/moc" -DQt5Core_RCC_EXECUTABLE="$(qt5_get_bindir)/rcc" -DBUILD_QT5=ON ) fi cmake_src_configure } # We use the FreeCADCmd binary instead of the FreeCAD binary here # for two reasons: # 1. It works out of the box with USE=-gui as well, not needing a guard # 2. We don't need virtualx.eclass and it's dependencies # The exported environment variables are needed, so freecad does know # where to save it's temporary files, and where to look and write it's # configuration. Without those, there are sandbox violation, when it # tries to create /var/lib/portage/home/.FreeCAD directory. src_test() { pushd "${BUILD_DIR}" > /dev/null || die export FREECAD_USER_HOME="${HOME}" export FREECAD_USER_DATA="${T}" export FREECAD_USER_TEMP="${T}" nonfatal ./bin/FreeCADCmd --run-test 0 popd > /dev/null || die } src_install() { cmake_src_install dobin src/Tools/freecad-thumbnailer if use gui; then newbin - freecad <<- _EOF_ #!/bin/sh # https://github.com/coin3d/coin/issues/451 : \${QT_QPA_PLATFORM:=xcb} export QT_QPA_PLATFORM exec /usr/$(get_libdir)/${PN}/bin/FreeCAD _EOF_ mv "${ED}"/usr/$(get_libdir)/${PN}/share/* "${ED}"/usr/share || die "failed to move shared resources" fi dosym -r /usr/$(get_libdir)/${PN}/bin/FreeCADCmd /usr/bin/freecadcmd rm -r "${ED}"/usr/$(get_libdir)/${PN}/include/E57Format || die "failed to drop unneeded include directory E57Format" use test && (rm -r "${ED}"/usr/include/${PN}/{gmock,gtest} || die) python_optimize "${ED}"/usr/share/${PN}/data/Mod/Start/StartPage "${ED}"/usr/$(get_libdir)/${PN}{/Ext,/Mod}/ # compile main package in python site-packages as well python_optimize } pkg_postinst() { xdg_pkg_postinst einfo "You can load a lot of additional workbenches using the integrated" einfo "AddonManager." # ToDo: check opencv, pysolar (::science), elmerfem (::science) # ifc++, ifcopenshell, z88 (no pkgs), calculix-ccx (::waebbl) einfo "There are a lot of additional tools, for which FreeCAD has builtin" einfo "support. Some of them are available in Gentoo. Take a look at" einfo "https://wiki.freecadweb.org/Installing#External_software_supported_by_FreeCAD" optfeature_header "Computational utilities" optfeature "BLAS library" sci-libs/openblas optfeature "Statistical computation with Python" dev-python/pandas optfeature "Use scientific computation with Python" dev-python/scipy optfeature "Use symbolic math with Python" dev-python/sympy optfeature_header "Imaging, Plotting and Rendering utilities" optfeature "Dependency graphs" media-gfx/graphviz optfeature "PBR Rendering" media-gfx/povray optfeature_header "Import / Export" optfeature "Interact with git repositories" dev-python/GitPython optfeature "Work with COLLADA documents" dev-python/pycollada optfeature "YAML importer and emitter" dev-python/pyyaml optfeature "Importing and exporting 2D AutoCAD DWG files" media-gfx/libredwg optfeature "Importing and exporting geospatial data formats" sci-libs/gdal optfeature "Working with projection data" sci-libs/proj optfeature_header "Meshing and FEM" optfeature "FEM mesh generator" sci-libs/gmsh optfeature "Triangulating meshes" sci-libs/gts optfeature "Visualization" sci-visualization/paraview } pkg_postrm() { xdg_pkg_postrm }