# This is a configuration file for Zabbix proxy daemon # To get more information about Zabbix, visit http://www.zabbix.com ############ GENERAL PARAMETERS ################# ### Option: ProxyMode # Proxy operating mode. # 0 - proxy in the active mode # 1 - proxy in the passive mode # # Mandatory: no # Default: # ProxyMode=0 ### Option: Server # IP address (or hostname) of Zabbix server. # Active proxy will get configuration data from the server. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: yes (if ProxyMode is set to 0) # Default: # Server= Server=127.0.0.1 ### Option: ServerPort # Port of Zabbix trapper on Zabbix server. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1024-32767 # Default: # ServerPort=10051 ### Option: Hostname # Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server! # Value is acquired from HostnameItem if undefined. # # Mandatory: no # Default: # Hostname= Hostname=Zabbix proxy ### Option: HostnameItem # Item used for generating Hostname if it is undefined. # Ignored if Hostname is defined. # # Mandatory: no # Default: # HostnameItem=system.hostname ### Option: ListenPort # Listen port for trapper. # # Mandatory: no # Range: 1024-32767 # Default: # ListenPort=10051 ### Option: SourceIP # Source IP address for outgoing connections. # # Mandatory: no # Default: # SourceIP= ### Option: LogType # Specifies where log messages are written to: # system - syslog # file - file specified with LogFile parameter # console - standard output # # Mandatory: no # Default: # LogType=file ### Option: LogFile # Log file name for LogType 'file' parameter. # # Mandatory: no # Default: # LogFile= LogFile=/var/log/zabbix/zabbix_proxy.log ### Option: LogFileSize # Maximum size of log file in MB. # 0 - disable automatic log rotation. # # Mandatory: no # Range: 0-1024 # Default: # LogFileSize=1 LogFileSize=128 ### Option: DebugLevel # Specifies debug level: # 0 - basic information about starting and stopping of Zabbix processes # 1 - critical information # 2 - error information # 3 - warnings # 4 - for debugging (produces lots of information) # 5 - extended debugging (produces even more information) # # Mandatory: no # Range: 0-5 # Default: # DebugLevel=3 ### Option: PidFile # Name of PID file. # # Mandatory: no # Default: # PidFile=/tmp/zabbix_proxy.pid PidFile=/run/zabbix/zabbix_proxy.pid ### Option: DBHost # Database host name. # If set to localhost, socket is used for MySQL. # If set to empty string, socket is used for PostgreSQL. # # Mandatory: no # Default: # DBHost=localhost ### Option: DBName # Database name. # For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored. # Warning: do not attempt to use the same database Zabbix server is using. # # Mandatory: yes # Default: # DBName= DBName=zabbix_proxy ### Option: DBSchema # Schema name. Used for IBM DB2 and PostgreSQL. # # Mandatory: no # Default: # DBSchema= ### Option: DBUser # Database user. Ignored for SQLite. # # Default: # DBUser= DBUser=zabbix ### Option: DBPassword # Database password. Ignored for SQLite. # Comment this line if no password is used. # # Mandatory: no # Default: # DBPassword= ### Option: DBSocket # Path to MySQL socket. # # Mandatory: no # Default: # DBSocket=/tmp/mysql.sock # Option: DBPort # Database port when not using local socket. Ignored for SQLite. # # Mandatory: no # Default (for MySQL): # DBPort=3306 ######### PROXY SPECIFIC PARAMETERS ############# ### Option: ProxyLocalBuffer # Proxy will keep data locally for N hours, even if the data have already been synced with the server. # This parameter may be used if local data will be used by third party applications. # # Mandatory: no # Range: 0-720 # Default: # ProxyLocalBuffer=0 ### Option: ProxyOfflineBuffer # Proxy will keep data for N hours in case if no connectivity with Zabbix Server. # Older data will be lost. # # Mandatory: no # Range: 1-720 # Default: # ProxyOfflineBuffer=1 ### Option: HeartbeatFrequency # Frequency of heartbeat messages in seconds. # Used for monitoring availability of Proxy on server side. # 0 - heartbeat messages disabled. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 0-3600 # Default: # HeartbeatFrequency=60 ### Option: ConfigFrequency # How often proxy retrieves configuration data from Zabbix Server in seconds. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1-3600*24*7 # Default: # ConfigFrequency=3600 ### Option: DataSenderFrequency # Proxy will send collected data to the Server every N seconds. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1-3600 # Default: # DataSenderFrequency=1 ############ ADVANCED PARAMETERS ################ ### Option: StartPollers # Number of pre-forked instances of pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartPollers=5 ### Option: StartIPMIPollers # Number of pre-forked instances of IPMI pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartIPMIPollers=0 ### Option: StartPollersUnreachable # Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java). # At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers # are started. # # Mandatory: no # Range: 0-1000 # Default: # StartPollersUnreachable=1 ### Option: StartTrappers # Number of pre-forked instances of trappers. # Trappers accept incoming connections from Zabbix sender and active agents. # # Mandatory: no # Range: 0-1000 # Default: # StartTrappers=5 ### Option: StartPingers # Number of pre-forked instances of ICMP pingers. # # Mandatory: no # Range: 0-1000 # Default: # StartPingers=1 ### Option: StartDiscoverers # Number of pre-forked instances of discoverers. # # Mandatory: no # Range: 0-250 # Default: # StartDiscoverers=1 ### Option: StartHTTPPollers # Number of pre-forked instances of HTTP pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartHTTPPollers=1 ### Option: JavaGateway # IP address (or hostname) of Zabbix Java gateway. # Only required if Java pollers are started. # # Mandatory: no # Default: # JavaGateway= ### Option: JavaGatewayPort # Port that Zabbix Java gateway listens on. # # Mandatory: no # Range: 1024-32767 # Default: # JavaGatewayPort=10052 ### Option: StartJavaPollers # Number of pre-forked instances of Java pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartJavaPollers=0 ### Option: StartVMwareCollectors # Number of pre-forked vmware collector instances. # # Mandatory: no # Range: 0-250 # Default: # StartVMwareCollectors=0 ### Option: VMwareFrequency # How often Zabbix will connect to VMware service to obtain a new data. # # Mandatory: no # Range: 10-86400 # Default: # VMwareFrequency=60 ### Option: VMwarePerfFrequency # How often Zabbix will connect to VMware service to obtain performance data. # # Mandatory: no # Range: 10-86400 # Default: # VMwarePerfFrequency=60 ### Option: VMwareCacheSize # Size of VMware cache, in bytes. # Shared memory size for storing VMware data. # Only used if VMware collectors are started. # # Mandatory: no # Range: 256K-2G # Default: # VMwareCacheSize=8M ### Option: VMwareTimeout # Specifies how many seconds vmware collector waits for response from VMware service. # # Mandatory: no # Range: 1-300 # Default: # VMwareTimeout=10 ### Option: SNMPTrapperFile # Temporary file used for passing data from SNMP trap daemon to the proxy. # Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file. # # Mandatory: no # Default: # SNMPTrapperFile=/tmp/zabbix_traps.tmp ### Option: StartSNMPTrapper # If 1, SNMP trapper process is started. # # Mandatory: no # Range: 0-1 # Default: # StartSNMPTrapper=0 ### Option: ListenIP # List of comma delimited IP addresses that the trapper should listen on. # Trapper will listen on all network interfaces if this parameter is missing. # # Mandatory: no # Default: # ListenIP=0.0.0.0 ### Option: HousekeepingFrequency # How often Zabbix will perform housekeeping procedure (in hours). # Housekeeping is removing outdated information from the database. # To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency # hours of outdated information are deleted in one housekeeping cycle. # To lower load on proxy startup housekeeping is postponed for 30 minutes after proxy start. # With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option. # In this case the period of outdated information deleted in one housekeeping cycle is 4 times the # period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days. # # Mandatory: no # Range: 0-24 # Default: # HousekeepingFrequency=1 ### Option: CacheSize # Size of configuration cache, in bytes. # Shared memory size, for storing hosts and items data. # # Mandatory: no # Range: 128K-8G # Default: # CacheSize=8M ### Option: StartDBSyncers # Number of pre-forked instances of DB Syncers. # # Mandatory: no # Range: 1-100 # Default: # StartDBSyncers=4 ### Option: HistoryCacheSize # Size of history cache, in bytes. # Shared memory size for storing history data. # # Mandatory: no # Range: 128K-2G # Default: # HistoryCacheSize=16M ### Option: HistoryIndexCacheSize # Size of history index cache, in bytes. # Shared memory size for indexing history cache. # # Mandatory: no # Range: 128K-2G # Default: # HistoryIndexCacheSize=4M ### Option: Timeout # Specifies how long we wait for agent, SNMP device or external check (in seconds). # # Mandatory: no # Range: 1-30 # Default: # Timeout=3 Timeout=4 ### Option: TrapperTimeout # Specifies how many seconds trapper may spend processing new data. # # Mandatory: no # Range: 1-300 # Default: # TrapperTimeout=300 ### Option: UnreachablePeriod # After how many seconds of unreachability treat a host as unavailable. # # Mandatory: no # Range: 1-3600 # Default: # UnreachablePeriod=45 ### Option: UnavailableDelay # How often host is checked for availability during the unavailability period, in seconds. # # Mandatory: no # Range: 1-3600 # Default: # UnavailableDelay=60 ### Option: UnreachableDelay # How often host is checked for availability during the unreachability period, in seconds. # # Mandatory: no # Range: 1-3600 # Default: # UnreachableDelay=15 ### Option: ExternalScripts # Full path to location of external scripts. # Default depends on compilation options. # # Mandatory: no # Default: # ExternalScripts=${datadir}/zabbix/externalscripts ### Option: FpingLocation # Location of fping. # Make sure that fping binary has root ownership and SUID flag set. # # Mandatory: no # Default: # FpingLocation=/usr/sbin/fping ### Option: Fping6Location # Location of fping6. # Make sure that fping6 binary has root ownership and SUID flag set. # Make empty if your fping utility is capable to process IPv6 addresses. # # Mandatory: no # Default: # Fping6Location=/usr/sbin/fping6 ### Option: SSHKeyLocation # Location of public and private keys for SSH checks and actions. # # Mandatory: no # Default: # SSHKeyLocation= ### Option: LogSlowQueries # How long a database query may take before being logged (in milliseconds). # Only works if DebugLevel set to 3 or 4. # 0 - don't log slow queries. # # Mandatory: no # Range: 1-3600000 # Default: # LogSlowQueries=0 LogSlowQueries=3000 ### Option: TmpDir # Temporary directory. # # Mandatory: no # Default: # TmpDir=/tmp ### Option: AllowRoot # Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy # will try to switch to the user specified by the User configuration option instead. # Has no effect if started under a regular user. # 0 - do not allow # 1 - allow # # Mandatory: no # Default: # AllowRoot=0 ### Option: User # Drop privileges to a specific, existing user on the system. # Only has effect if run as 'root' and AllowRoot is disabled. # # Mandatory: no # Default: # User=zabbix ### Option: Include # You may include individual files or all files in a directory in the configuration file. # Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. # # Mandatory: no # Default: # Include= # Include=/usr/local/etc/zabbix_proxy.general.conf # Include=/usr/local/etc/zabbix_proxy.conf.d/ # Include=/usr/local/etc/zabbix_proxy.conf.d/*.conf ### Option: SSLCertLocation # Location of SSL client certificates. # This parameter is used only in web monitoring. # # Mandatory: no # Default: # SSLCertLocation=${datadir}/zabbix/ssl/certs ### Option: SSLKeyLocation # Location of private keys for SSL client certificates. # This parameter is used only in web monitoring. # # Mandatory: no # Default: # SSLKeyLocation=${datadir}/zabbix/ssl/keys ### Option: SSLCALocation # Location of certificate authority (CA) files for SSL server certificate verification. # If not set, system-wide directory will be used. # This parameter is used only in web monitoring. # # Mandatory: no # Default: # SSLCALocation= ####### LOADABLE MODULES ####### ### Option: LoadModulePath # Full path to location of proxy modules. # Default depends on compilation options. # # Mandatory: no # Default: # LoadModulePath=${libdir}/modules ### Option: LoadModule # Module to load at proxy startup. Modules are used to extend functionality of the proxy. # Format: LoadModule= # The modules must be located in directory specified by LoadModulePath. # It is allowed to include multiple LoadModule parameters. # # Mandatory: no # Default: # LoadModule= ####### TLS-RELATED PARAMETERS ####### ### Option: TLSConnect # How the proxy should connect to Zabbix server. Used for an active proxy, ignored on a passive proxy. # Only one value can be specified: # unencrypted - connect without encryption # psk - connect using TLS and a pre-shared key # cert - connect using TLS and a certificate # # Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) # Default: # TLSConnect=unencrypted ### Option: TLSAccept # What incoming connections to accept from Zabbix server. Used for a passive proxy, ignored on an active proxy. # Multiple values can be specified, separated by comma: # unencrypted - accept connections without encryption # psk - accept connections secured with TLS and a pre-shared key # cert - accept connections secured with TLS and a certificate # # Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) # Default: # TLSAccept=unencrypted ### Option: TLSCAFile # Full pathname of a file containing the top-level CA(s) certificates for # peer certificate verification. # # Mandatory: no # Default: # TLSCAFile= ### Option: TLSCRLFile # Full pathname of a file containing revoked certificates. # # Mandatory: no # Default: # TLSCRLFile= ### Option: TLSServerCertIssuer # Allowed server certificate issuer. # # Mandatory: no # Default: # TLSServerCertIssuer= ### Option: TLSServerCertSubject # Allowed server certificate subject. # # Mandatory: no # Default: # TLSServerCertSubject= ### Option: TLSCertFile # Full pathname of a file containing the proxy certificate or certificate chain. # # Mandatory: no # Default: # TLSCertFile= ### Option: TLSKeyFile # Full pathname of a file containing the proxy private key. # # Mandatory: no # Default: # TLSKeyFile= ### Option: TLSPSKIdentity # Unique, case sensitive string used to identify the pre-shared key. # # Mandatory: no # Default: # TLSPSKIdentity= ### Option: TLSPSKFile # Full pathname of a file containing the pre-shared key. # # Mandatory: no # Default: # TLSPSKFile=