diff -ur work.orig/Makefile work/Makefile
--- work.orig/Makefile	2004-06-27 21:29:50.711871000 +0000
+++ work/Makefile	2004-06-27 21:31:11.591871000 +0000
@@ -2,8 +2,8 @@
 
 CC	 = gcc
 CFLAGS	 = -O2 -fsigned-char -omit-frame-pointer -Wall
-OBJS 	 = start_wdog set_therm fan_ctrl debug
-MANPGS	 = start_wdog.8 set_therm.8 fan_ctrl.8 debug.8
+OBJS 	 = start_wdog set_therm fan_ctrl nwdebug
+MANPGS	 = start_wdog.8 set_therm.8 fan_ctrl.8 nwdebug.8
 PREFIX	 = $(DESTDIR)/usr
 
 all: $(OBJS)
diff -ur work.orig/debug.8 work/debug.8
--- work.orig/debug.8	2004-06-27 21:29:50.711871000 +0000
+++ work/debug.8	2004-06-27 21:30:54.931871000 +0000
@@ -1,8 +1,8 @@
-.TH debug 8 "November 8 1998" "CCC" "Corel NetWinder Utilities" 
+.TH nwdebug 8 "November 8 1998" "CCC" "Corel NetWinder Utilities" 
 .SH NAME
-debug \- low-level hardware debugger utility
+nwdebug \- low-level hardware debugger utility
 .SH SYNOPSIS
-.B debug
+.B nwdebug
 .SH DESCRIPTION
 This program allows you to display and/or modify memory or I/O registers. 
 It bears some resemblance to the DOS program of the same name.  This is not
@@ -22,8 +22,8 @@
 ie. what the CPU sees at one particular address will be addressed at a
 different address if a PCI device needs to do DMA.
 .SH FILES
-.I /sbin/debug
-.I /man/man8/debug.8
+.I /sbin/nwdebug
+.I /man/man8/nwdebug.8
 .SH DIAGNOSTICS
 The program must be run by the super-user or it will fail with a polite
 error message.  This is to avoid arbitrary users from writing values into