# $FreeBSD: src/etc/snmpd.config,v 1.9.10.1.8.1 2012/03/03 06:15:13 kensmith Exp $
#
# Example configuration file for bsnmpd(1).
#

#
# Set some common variables
#
location := "Room 200"
contact := "sysmeister@example.com"
system := 1	# FreeBSD
traphost := localhost
trapport := 162

# Change this!
read := "public"
# Uncomment begemotSnmpdCommunityString.0.2 below that sets the community
# string to enable write access.
write := "geheim"
trap := "mytrap"

#
# Configuration
#
%snmpd
begemotSnmpdDebugDumpPdus	= 2
begemotSnmpdDebugSyslogPri	= 7

#
# Set the read and write communities.
#
# The default value of the community strings is NULL (note, that this is
# different from the empty string). This disables both read and write access.
# To enable read access only the read community string must be set. Setting
# the write community string enables both read and write access with that
# string.
#
# Be sure to understand the security implications of SNMPv2 - the community
# strings are readable on the wire!
#
begemotSnmpdCommunityString.0.1	= $(read)
# begemotSnmpdCommunityString.0.2	= $(write)
begemotSnmpdCommunityDisable	= 1

# open standard SNMP ports
begemotSnmpdPortStatus.0.0.0.0.161 = 1

# open a unix domain socket
begemotSnmpdLocalPortStatus."/var/run/snmpd.sock" = 1
begemotSnmpdLocalPortType."/var/run/snmpd.sock" = 4

# send traps to the traphost
begemotTrapSinkStatus.[$(traphost)].$(trapport) = 4
begemotTrapSinkVersion.[$(traphost)].$(trapport) = 2
begemotTrapSinkComm.[$(traphost)].$(trapport) = $(trap)

sysContact	= $(contact)
sysLocation	= $(location)
sysObjectId 	= 1.3.6.1.4.1.12325.1.1.2.1.$(system)

snmpEnableAuthenTraps = 2

#
# Load MIB-2 module
#
begemotSnmpdModulePath."mibII"	= "/usr/lib/libsnmp_mibII.so.3.0"

# Force a polling rate for the 64-bit interface counters in case
# the automatic computation is wrong (which may be the case if an interface
# announces the wrong bit rate via its MIB).
#%mibII
#begemotIfForcePoll = 2000

#
# Netgraph module
#
#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
#
#%netgraph
#begemotNgControlNodeName = "snmpd"

#
# pf(4) module
#
#begemotSnmpdModulePath."pf"	= "/usr/lib/snmp_pf.so"

#
# Host resources module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"

#
# Bridge module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"